Heavy duty, low production mitering saw that comes with one standard Bi-metal blade. Dual operating modes and hydraulic controlled down feed. 1.75HP, 220V motor with up to 60°right mitering capabilities. Ergonomic design for operator’s comfort and control. Horizontally mounted guide arms for more rigidity and straightest cuts.
Hydraulic controlled down feed with manual return
Automatic shut off at the end of the cut
Dual operating modes with rapid head descent
Powerful, flame tempered, manual clamping vise. Hand wheel adjusted with quick release lever for rapid vise opening and closing action. The vise clamps material firmly
Ergonomic designed for operator’s comfort and control
Gearbox is direct bolted to the bow for less vibration, and positive drive gear box is direct driven via steel and bronze gears, no belts and pulleys to contend with
CE Certified electronics. Low voltage switches. Thermo overload protection, low voltage protection with low voltage trigger motor start switch and blade cover interlock.
Miters up to 60° right. Mitering pre-sets with flip up stops makes set up fast and has precise with miter scale for all angles in between. The head turns-the material doesn’t.
Blade tensioning is done via. “Go No Go” tensioning system with LED taking the guess work out of tensioning. Saw will not run if blade tension is not correct
Horizontally mounted guide arms for more rigidity and straightest cuts. Guides are rollers with carbide inserts that are fully adjustable and replaceable
Three areas of coolant distribution for even blade coverage
Electric coolant pump and self-contained coolant system
Steel fabricated base, and stock stop gauge
Standard bi-metal blade
Part Number | 983111-2
Capacity | 8 1/2" Round
HorsePower | 1.75
Voltage | 220V 3 Phase
Maximum Blade Speed | 230 FPM
Blade Width | 1"
Blade Length | 101"
Blade Speed | 114-230 FPM
Solid Round 90° Capacity| 8 1/2"
Solid Round 45° Right Capacity | 6 3/4"
Solid Round 60° Right Capacity | 4 1/4"
Solid Square 90° Capacity | 7 3/4"
Solid Square 45° Right Capacity | 6 3/4"
Solid Square 60° Right Capacity | 4 1/4"
Solid Rectangle 90° Capacity | 10 3/8 x 7 3/4"
Solid Rectangle 45° Right Capacity | 7 3/4" x 6 1/4"
Solid Rectangle 60° Right Capacity | 4 1/2" x 4"
WorkTable Height | 37"
Height | 71"
Floor Space | 33" x 58"
Floor Space Left to Right | 33" x 58"
Floor Space Front to Back | 33" x 58"
PLEASE NOTE, IMPORTANT INFORMATION:
SALES TAX | Dake collects Sales Tax on all orders shipped to California