Slide Hammer Pullers

OTC 1155 Basic 5 LB Slide Hammer with 5/8 -18 threaded End May be used with an OTC internal pulling attachment or with internal or external-internal threaded adapters.   No. 1155 – Basic slide hammer unit is 24" long with a 5 lb. hammer...

OTC 1156 Puller Slide Hammer 2-1/2lb with Threaded End Ideal for pulling jobs in very close quarters, as in removal of small bore bushings, bearings, oil seals, etc. Internal  pulling attachment has jaw spread of 1/2” to 1-3/8”,...

OTC 1157 2-1/2 lb. Slide Hammer These pullers combine a basic slide hammer unit with a No. 1152 internal pulling attachment.  Ideal for removing bearing cups, outer races, and oil seals from blind holes.  Upon removal of the internal pulling...

OTC 1158 5 lb. Slide Hammer These pullers combine a basic slide hammer unit with a No 1152 internal pulling attachment.  Ideal for removing bearing cups, outer races, and oil seals from blind holes.  Upon removal of the internal pulling...

OTC 1170 Pilot Bearing Puller These very versatile pullers are built specially for inside pulling jobs, and particularly for removing flywheel pilot bearings on automobiles, trucks, and tractors.  Also very practical for pulling motor, generator,...

OTC 1171 Pilot Bearing Puller These very versatile pullers are built specially for inside pulling jobs, and particularly for removing flywheel pilot bearings on automobiles, trucks, and tractors. Also very practical for pulling motor, generator, and...

OTC 1172 Pilot Bearing Puller These very versatile pullers are built specially for inside pulling jobs, and particularly for removing flywheel pilot bearings on automobiles, trucks, and tractors.  Also very practical for pulling motor, generator,...

OTC 1173 Slide Hammer Puller Ideal for pulling jobs in very close quarters, as in removal of small-bore bushings, bearings, oil seals, etc. Internal pulling attachment has a jaw spread of ½" to 1-3/8", adjusted by turning the slide hammer handle...

OTC 1174 Head Assembly Only Ideal for pulling jobs in very close quarters, as in removal of small-bore bushings, bearings, oil seals, etc. Internal pulling attachment has a jaw spread of ½" to 1-3/8", adjusted by turning the slide hammer handle...

OTC 1176 Reversible-Jaw Slide Hammer Puller Extremely versatile puller, which will accomplish many pulling jobs involving gears, bearings, outer races, grease retainers, oil seals, etc.  Either two or three puller jaws may be used to handle "inside"...

OTC 1177 Reversible-Jaw Slide Hammer Puller Extremely versatile puller, which will accomplish many pulling jobs involving gears, bearings, outer races, grease retainers, oil seals, etc.  Either two or three puller jaws may be used to handle "inside"...

OTC 1178 Slide Hammer Puller Set *** Actual Product May Differ From Image Shown ***   This useful set contains OTC's popular No. 1176 reversible-jaw slide hammer puller, plus an assortment of special jaws and adapters.  You get all...

OTC 8-Way Slide Hammer Set Use for 2/3-way internal or external jobs. Pull flange-type rear axles, stubborn oil seals and bearings, and other press-fit parts Includes: No. 1155 – Slide hammer w/5 lb. hammerNo. 7372 – Rear axle pulling...

OTC 22185 HAMMER For use with slide hammer puller.

OTC 27315 Slide Hammer - Puller Hook All the tools you need for flange-type rear axle and bearing removal on most late model passenger cars and light trucks. The axle bearing pullers, used with the slide hammer make it easy to remove semi-floating rear...

OTC 34331 Slide Hammer Part Durable construction for stubborn jobs, Can be used with most of the puller attachments 5 lb. slide hammer

OTC 9-Way Slide Hammer Puller Set Features: Pulls flange type rear axles and most front wheel drive hubs Internal and external jaws provide a variety of combinations to pull bearings, gears and seals Two and three way cross blocks and cone provide the...

OTC 4581 Slide Hammer Blind Hole Puller For pulling jobs requiring an internal pull,  Set includes: Four collets, which fit a wide range of applications. Select the appropriate sized collet by comparing it with the application. Insert the collet,...

Slide Hammer Puller Just 8-1/2" long to fit into tight spots, but its 1-1/2 pound hammer gives you a little extra muscle for stubborn jobs. It's perfect for pulling injector nozzles. The shank is threaded 1/2" –20 and has a 5/8" –18...