Dake 983110-1 SE-6.5 M Mitering Bandsaw 

Mitering bandsaw with dual operating modes and hydraulic controlled down feed. 2.5HP, 120V motor with up to 60°right mitering capabilities. Ergonomic design for operator’s comfort and control. Variable speed with rotary adjusting wheel and “Constant speed control” Maintains constant speed to prevent bog downs when cutting.

Features:

• Hydraulic controlled down feed with manual return
• Automatic shut off at the end of the cut
• Dual operating modes, manual cutting or head feed cutting
• Powerful, manual clamping vise, with quick release lever for rapid vise opening and closing action for fast material size change over. The vise clamps material firmly.
• Ergonomic designed for operator’s comfort and control
• Motor gearbox combination bolted to the bow for less vibration
• Variable speed with rotary adjusting wheel and “Constant speed control” Maintains constant speed to prevent bog downs when cutting
• CE Certified electronics. Low voltage switches. Thermo over load protection, low voltage protection with low voltage trigger motor start switch
• Blade tensioning is done via. “Go No Go” tensioning system with LED taking the guess work out of tensioning. Saw will not run if blade tension is not correct
• Miters up to 60° right. Mitering pre-sets with slide stops makes set up fast and has precise with miter scale for all angles in between. The head turns-the material doesn’t
• Horizontally mounted guide arms for more rigidity and straightest cuts. Guides are rollers with carbide inserts that are fully adjustable and replaceable
• Electric coolant pump and self-contained coolant system
• 120 volt means you can use it most anywhere
• Steel fabricated base, and stock stop gauge, one Bi-metal blade

Standard Equipment:

• Steel base
• Blade
• Quick release vice
• 120V Motor

Specification:

• Part Number | 983112-2
• Capacity | 10" Round
• HorsePower | 2.75
• Voltage | 220V 3 Phase
• Maximum Blade Speed | 230 FPM
• Blade Width | 1"
• Blade Length | 108"
• Blade Speed | 115-230 FPM
• Solid Round 90° Capacity | 10"
• Solid Round 45° Right Capacity | 8"
• Solid Round 60° Right Capacity | 5"
• Solid Square 90° Capacity | 7 1/2"
• Solid Square 45° Right Capacity | 7 1/2 / 6 3/4"
• Solid Square 60° Right Capacity | 5"
• Solid Rectangle 90° Capacity | 10 1/2" x 7 3/4"
• Solid Rectangle 45° Right Capacity | 8 1/4" x 3 1\8" 
• Solid Rectangle 60° Right Capacity | 4 3/4" x 5 1/4"
• Worktable Height | 37"
• Height | 74"
• Floor Space | 28" x 66"
• Weight | 308 lbs

PLEASE NOTE, IMPORTANT INFORMATION:

•  | Dake collects on all orders shipped to California