Dake

Dake 983112-2 Model SE 10 DM Stationary Mitering Bandsaw

SKU: DAK9831122
Shipping: Free Shipping
Shipping: Free Only In the US 48 States
$10,595.00

Dake SE 10 DM 983112-2 10" Round Stationary Mitering Bandsaw

Heavy duty, dual mitering saw that comes with one standard Bi-metal blade. Hydraulic controlled down feed with automatic shut off at the end of the cut. 2.75HP, 220V motor with up to 60°right mitering capabilities. Dual operating modes with head descent control lock switch. Pre-set the down feed and shut switch so down feed does not need resetting after each cut.

Features:

  • Hydraulic controlled down feed with adjustable manual return
  • Automatic shut off at the end of the cut
  • Dual operating modes with head descent control lock switch. Pre-set the down feed and shut switch so down feed does not need resetting after each cut
  • Powerful, flame tempered, manual clamping vise. Hand wheel adjusted with quick release lever for rapid vise opening and closing action. The vise clamps material firmly
  • Traversing vise can be used left or right of the blade
  • Ergonomic designed for operator’s comfort and control
  • Gearbox is direct bolted to the bow for less vibration, and positive drive gear box is direct driven via steel and bronze gears, no belts and pulleys to contend with
  • CE Certified electronics. Low voltage switches. Thermo over load protection, low voltage protection with low voltage trigger motor start switch and blade cover interlock
  • Blade tensioning is done via. A hand wheel and color coded gauge tensioning system taking the guesswork out of tensioning
  • Miters up to 60° right / 45° left. Mitering pre-sets with flip up and pin stops makes set up fast and has precise with miter scale for all angles in between. The head turns-the material doesn’t
  • Horizontally mounted guide arms for more rigidity and straightest cuts. Guides are rollers with carbide inserts that are fully adjustable and replaceable
  • Electric coolant pump and self-contained coolant system
  • Steel fabricated base, and stock stop gauge

Standard Equipment:

  • Steel base
  • 1 standard bi-metal blade
  • Traversing, manual vise
  • Coolant
  • Stock stop gauge

Specifications:

  • Model Number | SE 10 DM
  • Part Number | 983112-2
  • Capacity | 10" Round
  • Horsepower | 2.75
  • Voltage | 220V 3PH
  • Maximum Blade Speed | 230 FPM
  • Blade Width | 1"
  • Blade Length | 108"
  • Blade Speed | 115-230 FPM
  • Solid Round 90 Degree Capacity | 10"
  • Solid Round 45 Degree Right Capacity | 8"
  • Solid Round 60 Degree Right Capacity | 5"
  • Solid Square 90 Degree Capacity | 7.5"
  • Solid Square 45 Degree Right Capacity | 7.5" / 6.75"
  • Solid Square 60 Degree Right Capacity | 5"
  • Solid Rectangle 90 Degree Capacity | 10.5" x 7.75"
  • Solid Rectangle 45 Degree Right Capacity | 8.25" x 3.125"
  • Solid Rectangle 60 Degree Right Capacity | 4.75" x 5.25"
  • Bed Work (area) | N/A
  • Worktable Height | 37"
  • Height | 74"
  • Floor Space | 28" x 66"
  • Floor Space Left to Right | 28" x 66"
  • Floor Space Front to Back | 28" x 66"
  • Floor to Bed | N/A

PLEASE NOTE, IMPORTANT INFORMATION:

  • This item ships by truck. Additional shipping charges will apply to ship to a Non-Commercial Address. If Residential Delivery or Liftgate Delivery is needed, please select one of the choices above BEFORE adding to the cart!
  • .
Title of the document

Dake Warranty

Customers Also Viewed