Metal Notchers/Corner Notchers

Baileigh Industrial SN-F04-MS Sheet Metal Notcher If you are looking for a little more capacity from your corner notcher, try the SN-F04-MS sheet metal corner notcher from Baileigh Industrial. The SN-F04-MS is the great for making perfect corners in...

Baileigh Industrial SN-F09-MS Sheet Metal Corner Notcher The SN-F09-MS sheet metal corner notcher from Baileigh Industrial is the perfect machine for making those perfect corners in that just are not possible with hand tools. This corner notcher has a 9...

Baileigh Industrial SN-F11-AN Corner Notcher The SN-F11-AN pneumatic corner notcher from Baileigh Industrial is the great machine for making perfect corners in sheet metal. The SN-F11-AN corner notcher has an 11 gauge mild steel capacity, so it can make...

Baileigh Industrial SN-F16-FN Sheet Metal Corner Notcher Notching corners is a staple of any fabrication shop. Good clean notches are the difference between a great product and a not so great one. The SN-F16-FN sheet metal corner notcher is an...

Baileigh Industrial SN-F16-HN Manual Corner Notcher The SN-F16-HN manual corner notcher is a high quality cast iron sheet metal notcher perfect for any garage or sheet metal shop. The cutting angle is fixed at 90 degrees and can notch up to 6" x 6" in...

Baileigh Industrial SN-V04-MS Sheet Metal Notcher Ever have odd angles that you need to notch out of sheet metal, something that will look totally whack when finished if not done right? Enter the SN-V04-MS; this great machine is a 220 volt three phase...

Baileigh TN-210H Hole Saw Notcher  Need to weld tubing at varying angles? The TN-210H makes notches up to 50° in less than 30 seconds. Built from .5” plate steel, this hole saw notcher comes at an economical price. Maximum capacity...

DAKE 960400 DLN-6200 Notcher This corner Notcher has a 6mm or 4-gauge mild steel capacity, so it can make quick work of most any job. The DLN-6200 sheet metal corner Notcher machine has blades that are fixed at 90°, ensuring a perfect notch...

DAKE DLN-6220V Notcher This model hydraulic Notcher will cut notches from 30 to 140 degrees in mild steel and up to 6mm in thickness and will do this at a maximum rate of 15 strokes per minute. 24 Ton Capacity 4 Ga. Mild Steel, Cutting Length 8.5" x 8...