Laguna 25x2 Classic Double Drum Sander
Sand two grits in a single pass with a 25×2 Double Drum Sander. Featuring Intellisand Technology and a 5 HP motor, you can significantly reduce the amount of time you spend sanding.
Features:
- Intellisand Technology: Automatically adjusts conveyor speed based on load prevents gouging, damaging or burning stock; provides consistent finish even with varying grain pattern and density; greatly increases abrasive planing and dimensioning
- Flatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no “flex” in conveyor, guaranteeing flatness to less than .010 across the width of the sander.
- Abrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter and thinner.
- Patented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loosening, and overlapping.
- Self-cooling drum prevents overheating and extends abrasive life.
Specifications:
- Maximum Sanding Width | 25″
- Minimum Sanding Length | 3-½″
- Maximum Sanding Thickness | 6″
- Minimum Sanding Thickness | 1/32″
- Dimensions | 43″H x 46″W x 31″D
- Drum (Extruded Aluminum) | 5″ x 25″
- Drum Speed | 1740 RPM
- Dust Hood (Steel Hood, Hinged At Back) | (2) 4″ Vacuum Ports, Min CFM: 1000 Recommended
- Ball Bearing (1″) | 4 sealed and permanently lubricated
- Conveyor Motor | 100 in. -lb. torque, direct drive D.C. motor, ranged variable, 0-15 FPM
- Drive Motor (TEFC) | 5 HP, 1 Phase
- Power Requirements | 208-230V, 60Hz; 1 Phase, 30 Amp Service; 3 Phase 20 Amp Service
- Shipping Weight | 475 lbs
- Shipping Dimensions | 50″L x 44-½″W x 44-½″H
- Casters Included | No
- Cord & Plug Included | No
