Drive Axle Service

OTC 4543A 6 Piece 4wd Spindle Nut Socket Set Chrome vanadium steel sockets cover most SUV and light truck applications. Sockets have ½" square drive, allowing use of a torque wrench, ratchet, or breaker bar. Contents of Set: No. 4543-1...

OTC 4547A 7 Piece Axle Nut Socket Set Extra-long, ½" drive chrome molybdenum sockets for heavy-duty use in removing and installing axle nuts. Use with a ratchet, breaker bar, or torque wrench. Contained in a blow-molded plastic storage case...

OTC 6601 Locknut Socket No. 6601 – Services 2003–newer Ford F-250, F-350, and F-450 Super Duty trucks with 10-1/2 inch rear axle.

OTC 6602 Differential Bearing Preload Wrench Differential Bearing Preload Wrench Similar to Miller C-4164 Use to adjust differential bearing free play on Chrysler/ Dodge vehicles with 7-1/4", 8-1/4", 8-3/4", and 9-1/4" rear axles Tool fits inside axle...

OTC 6935 U-Joint Service Adapter For use with the 7248 C-Frame to service the u-joints found on Dana 60 4WD front drive axles.

OTC 7090A Front Wheel Locknut Wrench Features: 1973-1981 GM 3/4 and 1 ton 4WD trucks.

OTC 7140 Escort/Lynx Half-Shift Remover/Differential Rotator Essential tool for removing the left-hand half shaft from Escort/Lynx transaxles. It ensures correct removal and allows the technician to turn the differential.

OTC 7157 1/2" Sq. Dr. Front Wheel Bearing Locknut Wrench for Ford, GM and Dodge ('59-newer) Applications: • 1993-newer Ford Ranger, Bronco II and Explorer with manual hubs • 1995-newer Ford F-series 1/2 ton trucks and full-size Bronco with...

OTC 7158 1/2" Sq. Dr. Front Wheel Bearing Locknut Wrench for Ford, GM and Dodge ('82-'95) Applications: • 1985 1/2-1995 Ford F-series H.D. 3/4 and 1 ton Dana 50 IFS or Dana 60 front axle • 1985-1995 Ford F-series 1/2 ton truck and full size...

OTC 7217 Locknut Socket Features: Designed to fit the axle nut on Chevy Topkick/Kodiak, 2003 - Newer. Similar to J-44275. Specifications: Product Dimensions | 3 × 2 × 2 in Product Weight | 0.8 lb Shipping Weight | 0.8 lb

OTC 7269 1/2" Sq. Dr. Locknut Socket for Ford 3/4 and 1-Ton Trucks ('85-newer) 1/2” Drive FW Bearing Locknut Socket. For use on: 1985 and newer Ford F-series 3/4- and 1-ton truck with Dana 80 rear axle. Same as T88T-4252-A

OTC 7270A 1/2" Sq. Dr. Locknut Socket for Ford and Dodge 1984-1992 Ford Ranger & Bronco II with manual hubs 1986-1995 Ford F-series 1/2-ton truck and full size Bronco with Dana 44 front axle 1990-1993 Dodge trucks with Dana 44 automatic hubs

OTC 7372 Rear Axle Pulling Attachment Rear Axle Puller This puller will enable you to remove flange-type rear axles from most late model cars and light trucks. It works on axles having bolts and studs up to 9/16" diameter. Fits 4-, 5-, or 6-bolt patterns...

OTC 7494A Bearing Remover Set Each of the pullers included in this set make short work removing semi-floating rear axle bearings. The 3 piece set services most domestic cars. Works with OTC puller-type slide hammers. Features: Washer captures the...

OTC 7507 Universal Inner C.V. Joint Puller No. 7507 – CV joint fork only. Use with OTC slide hammer No. 1155, extension No. 7508, or both.

OTC 7508 Slide Hammer Extension No. 7508 – 17-1/2"-long slide hammer extension.

OTC 7509 CV Joint Tool This tool is a must when you are servicing outer tie rods. It works on imported and domestic models, front or rear wheel drive, cast or stamped-steel knuckles. Pry bars can damage expensive aluminum transmission cases, and...

OTC 7612 Toyota Wrench No. 7612 – 54 mm hex socket fits front wheel bearing adjusting nut of Toyota FJ, LN, and RN. Has 1/2" square drive end, permitting use of a torque wrench. 1/2" sq. drive.

OTC 7698 Bearing Locknut Socket No. 7698 – Services 1988–1995 Isuzu Trooper, Rodeo, Amigo, and pickup; 1989–1995 Honda Passport; Jeep J20 pickups with Dana 60 axle. 1/2" sq. drive.

OTC 7795 1/2" Sq. Dr. Locknut Socket for Ford 1/2-Ton Trucks ('95-96) 1/2” Drive FW Bearing Locknut Sockets For 1995 and newer Ford F-Series 1/2-ton trucks and full-size Bronco with automatic hubs. Same as T95T-1197-A Wt., 1 lb., 11 oz.