Slide Hammer Pullers

OTC 1155 Basic 5 LB Slide Hammer with 5/8 -18 threaded End May be used with an OTC internal pulling attachment or with internal or external-internal threaded adapters.   No. 1155 – Basic slide hammer unit is 24" long with a 5 lb. hammer...

OTC 1156 Puller Slide Hammer 2-1/2lb with Threaded End Ideal for pulling jobs in very close quarters, as in removal of small bore bushings, bearings, oil seals, etc. Internal  pulling attachment has jaw spread of 1/2” to 1-3/8”,...

OTC 1170 Pilot Bearing Puller These very versatile pullers are built specially for inside pulling jobs, and particularly for removing flywheel pilot bearings on automobiles, trucks, and tractors.  Also very practical for pulling motor, generator,...

OTC 1171 Pilot Bearing Puller These very versatile pullers are built specially for inside pulling jobs, and particularly for removing flywheel pilot bearings on automobiles, trucks, and tractors. Also very practical for pulling motor, generator, and...

OTC 1172 Pilot Bearing Puller These very versatile pullers are built specially for inside pulling jobs, and particularly for removing flywheel pilot bearings on automobiles, trucks, and tractors.  Also very practical for pulling motor, generator,...

OTC 1174 Head Assembly Only Ideal for pulling jobs in very close quarters, as in removal of small-bore bushings, bearings, oil seals, etc. Internal pulling attachment has a jaw spread of ½" to 1-3/8", adjusted by turning the slide hammer handle...

OTC 22185 HAMMER For use with slide hammer puller.

OTC 27315 Slide Hammer - Puller Hook All the tools you need for flange-type rear axle and bearing removal on most late model passenger cars and light trucks. The axle bearing pullers, used with the slide hammer make it easy to remove semi-floating rear...

OTC 34331 Slide Hammer Part Durable construction for stubborn jobs, Can be used with most of the puller attachments 5 lb. slide hammer

Slide Hammer Puller Just 8-1/2" long to fit into tight spots, but its 1-1/2 pound hammer gives you a little extra muscle for stubborn jobs. It's perfect for pulling injector nozzles. The shank is threaded 1/2" –20 and has a 5/8" –18...

OTC 6501 Basic Slide Hammer Basic Slide Hammer May be used with an internal pulling attachment or with internal or external-internal threaded adapters.  6501 – Basic slide hammer unit is 17" long with a 1-3/4 lb. hammer and a 1/2"-20 threaded...

OTC 6541 Pulling Hook This slide hammer puller attachment is used to remove seals, bearings, and other press-fit parts. Designed to be used with OTC No. 1155 (5 lb.) or No. 1156 (2-1/2 lb.) slide hammer, or other slide hammers having 5/8-18 threads

OTC 6627 Grip Wrench Adapters For grip wrenches using single-lead thread adjusting screw. Adapter threads onto a slide hammer with a 5/8"–18 thread. No. 205378 – Grip wrench threads onto a 7/16"–14 end of adapter for pulling use...

OTC 7374 Axle Puller This puller will enable you to remove flange-type rear axles from most late model cars and light trucks. It works on axles having bolts and studs up to 9/16" diameter. -Fits 4-, 5-, or 6-bolt patterns and stud circles from 4-1/4" to...

OTC 7703 10 lb. Slide Hammer This heavy-duty slide hammer puller gets tough with those really stuck parts. It has all the features of our smaller versions. The difference is the ten-pound hammer that gives you the extra muscle for really stubborn pulling...