Hydraulic Rams

OTC 4421 Pilot Bearing Puller Attachment Removes pilot bearings, thrust washers, and smaller bearings hidden in a shaft or housing. Features: Jaws require a minimum of 5/8" opening and can range up to a max of 1-1/2" diameter. Min/Max Reach is 1/8" to...

OTC 4420 Pilot Bearing Pulling Attachment Use to pull a pilot bearing from the end of the crankshaft. Features: Interchangeable jaws. One set of jaws covers a spread of 1/2" to 1-1/2". Other set of jaws covers a spread of 3/8" to 1-3/8". Both sets of...

OTC 4422 Pilot Bearing Puller Use to pull a pilot bearing from the end of the crankshaft. Features: A restriction plate catches the bridge and prevents the jaws from spinning when force is engaged. The "Tee Handle" design is easy-to-use and eliminates...

OTC 4523 Offset Hose Clamp Pliers Head is offset from handle to allow access to hard-to-reach clamps. Features: Swivel jaws allow pliers to be used on many different flat-band and ring-type hose clamps.

OTC 4525 Flexible Hose Clamp Pliers Description: Allows technician to access the flat-type hose clamps located in hard-to-reach areas. • Pliers has locking mechanism to hold clamp in the open position, making removal and installation of clamp easier...

OTC 4441 HD 3 Leg Oil Filter Wrench Large Description: • Self-gripping design for true universal fit from 4" to 6 1/2" • Heavy duty knurled leg design for extra grip and strength • 1/2" square drive

OTC 4440 Heavy Duty 3 Leg Filter Wrench Standard Self-gripping design for true universal fit from 3" to 4-3/4" Heavy duty knurled leg design for extra grip and strength. 1/2" square drive with 21mm hex option

OTC 4404 Tubing Bender For 5/16" and 3/8" dia. tubing Features: Can bend up to 180+ degrees Quick release handle to easily remove tubing from bender Sturdy steel construction

OTC 4403 Tubing Bender For 3/16" and 1/4" dia. tubing Features: Can bend up to 180+ degrees Quick release handle to easily remove tubing from bender Sturdy steel construction

OTC 4491 Mechanic’s Stethoscope Quick and accurate way to locate vehicle noise. Features: Spring diaphragm on end of hose amplifies noise. Includes two hose ends: long rod helps pinpoint noises in hard-to-access areas; short adapter helps...

OTC 4295 Wheel Stud Service Kit Installation done by pushing on the head, eliminating the need for threaded adapters. • Reduces number of adapters required • Reduces damage to studs • Increases ease of use • Remove and install 10...

OTC 4461 Terminal Release Tool Set Save time and money • Repair or rebuild a wiring harness without having to order the entire OE replacement. • Insert the appropriate release tool to depress the locking tab and the individual wire slides right...

OTC 4504 Stinger Bubble Flaring Tool Kit - I.S.O. Designed for crack-free bubble flares on soft steel tubing used in automotive brake systems. Features: Includes four dies: 4.75, 6, 8, and 10mm adapters. Forged steel yoke, flaring bar, and all the...

OTC 4503 Stinger Fractional Double Flaring Tool Kit Designed for double or single flare in copper, aluminum, soft steel brake Includes five adapters 3/16” through 1/2” (4.8mm through 12.7mm). Chrome swivel, made of alloy steel reduces...

OTC 4533 GM W-Body Strut Tool Kit Includes one T50 TORX bit, a universal drive handle, and a double-ended socket Use one end of the socket to remove/install the jounce bumper; the other end to remove/install the strut cap nut. Works on GM W-body...

OTC 4502 Stinger Hose Clamp Pliers Set - 2 pc. Hose Clamp Pliers Set (2 piece) Features: Includes a cross-slotted jaw pliers and a wide, flat-band hose clamp pliers. Services most ring-type or flat-band hose clamps. The clamps are held open with a...

OTC 4437 8-Piece Sensor Socket Set Set includes: 4673-1 - 29 mm Vacuum Switch and O2 Socket, 1/2" Drive. 4673-2 - 7/8" Vacuum Switch and O2 Socket (wide slot), 3/8" Drive. 4673-3 - 27 mm Thermal Sensor Switch, 1/2" Drive. 4673-4 - 7/8" Vacuum Switch and...

OTC 4412 Ratcheting Hose & PVC Cutter (Heavy Duty) Cuts hose and PVC up to 1-3/4" dia. Features: Metal frame and rubber padded ergonomic handles for high leverage and comfort. Compound ratcheting action provides maximum cutting power. Will also cut...

OTC 4411 Ratcheting Hose & PVC Cutter (Standard) Cuts hose and PVC up to 1-3/8" dia. Features Metal frame and ergonomic handles for high leverage. Compound ratcheting action provides maximum cutting power. Will also cut cable and wires.

OTC 4509 Straight-Blade Hose Cutter Cuts rubber hoses ranging from 1/4" to 1-1/2". Simply place hose in tool and squeeze handle to cut. Replacement steel cutter blade No. 4509-1 is available.