Hydraulic Rams

OTC 4460 Electrical Connector Separator Tool (2 piece) Releases locking tabs on electrical connectors, component connections and wiring harness connectors. Eliminates damage to the tab or connector. This pair of tools permits access to...

OTC 4493 Stinger Angle-tip Relay Pliers Designed to remove and install relays, which are usually located in confined, hard-to-reach areas.  Specially coated tips offer a solid grip on the relay.  

OTC 4492 4 pc. E-Clip Tool Set 5-Piece E-Clip Tool Set Features: Dual operation tool: one end of tool releases e-clip; other end of tool installs e-clip. Tools fit four sizes of e-clips: 6 mm, 7 mm, 8 mm, and 9 mm. Each tool easily locks into handle...

OTC 4401 Tube Bending Pliers Bends tubing from the side allowing for use in limited access areas.   3/16" and 1/4" diameter tubing

OTC 4472 3-IN-1 SOLDER TOOL  DESCRIPTION: The OTC 4472 3-in-1 Cordless Solder Tool is the professional choice when soldering, shrinking or spot torching is required. Variable heat control quickly generates up to 480° C (900°F) of...

OTC 4467 Automatic Wire Stripper Quick removal of insulation on wire AWG 12-20. Comes with adjustable depth gauge (8mm to 12mm). Sharp v-shaped tooth easily removes insulation without any damage to soft wire strands.   Cutting tool stored...

OTC 4468 9" Self Adjusting Wire Stripper Strips insulating sheathing from wires ranging from 10 ga. to 22 ga.  Easy-to-use, just insert wire and squeeze. Also cuts and crimps.

OTC 4477 3/8" Cable Cutter Perfect choice for cutting heavier copper and aluminum cables. This tool is especially valuable for battery service where replacing a terminal is required. Clean cut with minimal mushing of wire strands.

OTC 4508 Stinger Oil/Grease Seal Puller Professional Style Seal Puller Designed to remove oil and grease seals when servicing cars, SUVs, and light trucks without damaging the housing or bearing. Hook tips in two sizes and professional handle design...

OTC 4421 Pilot Bearing Puller Attachment Removes pilot bearings, thrust washers, and smaller bearings hidden in a shaft or housing. Features: Jaws require a minimum of 5/8" opening and can range up to a max of 1-1/2" diameter. Min/Max Reach is 1/8" to...

OTC 4420 Pilot Bearing Pulling Attachment Use to pull a pilot bearing from the end of the crankshaft. Features: Interchangeable jaws. One set of jaws covers a spread of 1/2" to 1-1/2". Other set of jaws covers a spread of 3/8" to 1-3/8". Both sets of...

OTC 4422 Pilot Bearing Puller Use to pull a pilot bearing from the end of the crankshaft. Features: A restriction plate catches the bridge and prevents the jaws from spinning when force is engaged. The "Tee Handle" design is easy-to-use and eliminates...

OTC 4523 Offset Hose Clamp Pliers Head is offset from handle to allow access to hard-to-reach clamps. Features: Swivel jaws allow pliers to be used on many different flat-band and ring-type hose clamps.

OTC 4525 Flexible Hose Clamp Pliers Description: Allows technician to access the flat-type hose clamps located in hard-to-reach areas. • Pliers has locking mechanism to hold clamp in the open position, making removal and installation of clamp easier...

OTC 4441 HD 3 Leg Oil Filter Wrench Large Description: • Self-gripping design for true universal fit from 4" to 6 1/2" • Heavy duty knurled leg design for extra grip and strength • 1/2" square drive

OTC 4440 Heavy Duty 3 Leg Filter Wrench Standard Self-gripping design for true universal fit from 3" to 4-3/4" Heavy duty knurled leg design for extra grip and strength. 1/2" square drive with 21mm hex option

OTC 4404 Tubing Bender For 5/16" and 3/8" dia. tubing Features: Can bend up to 180+ degrees Quick release handle to easily remove tubing from bender Sturdy steel construction

OTC 4403 Tubing Bender For 3/16" and 1/4" dia. tubing Features: Can bend up to 180+ degrees Quick release handle to easily remove tubing from bender Sturdy steel construction

OTC 4491 Mechanic’s Stethoscope Quick and accurate way to locate vehicle noise. Features: Spring diaphragm on end of hose amplifies noise. Includes two hose ends: long rod helps pinpoint noises in hard-to-access areas; short adapter helps...

OTC 4295 Wheel Stud Service Kit Installation done by pushing on the head, eliminating the need for threaded adapters. • Reduces number of adapters required • Reduces damage to studs • Increases ease of use • Remove and install 10...