Dake

Dake 976200 Euro 370 S Semi-Automatic Cold Saw, Ferrous Head

SKU: DAK976200
Shipping: Free Shipping
Shipping: Free Only In the US 48 States
$21,495.00

Dake 76200 Euromatic 370S Cold Saw

Finally - a user-friendly cold saw with "aggressive precision" and "stamina". These Automatic Euromatic Cold Saws feature 2 removable surface wear plates, and have a minimum 6” remnant drop piece size. They also have a head that rotates 45º right of center and up to 90º left of center. They also feature a manual oiler, three gib guides, a 3.5 HP motor or 4.5 HP motor, large automatic clamping vise, a self-adjusting metal chip brush, and a self-adjusting gripper-type feeder vise.

Features:

  • Head rotates 45º right of center for miter cutting and up to 90º left of center for miter cutting and slotting.
  • Table features two removable surface wear plates to support longer cut lengths.
  • Three gib guides for the cutting head with two adjustable cast iron gib blocks in each for increased cutting accuracy and easy adjustment.
  • Rear surface of the gear box is machined with interlocking circles to evenly distribute oil over the ways.
  • Large automatic clamping vise features adjustable gib guides, removable face plates, and an anti-burr arm.
  • Minimum 6" remnant drop piece size for maximum material use.
  • Outboard section of the table is designed so shorter lengths tumble down a mesh discharge chute.
  • Manual oiler to lubricate 1" thick, hardened ways.
  • 3.5/4.5 HP motor has the muscle to drive a 14-1/2" or 12" blade quickly and quietly through solids.
  • Clear acrylic hood has shock assists for raising and lowering and electrical interlocks.

Standard Equipment:

  • Blade
  • Coolant
  • Saw blade selector calculator
  • Tool kit for changing blades
  • Instruction and service manual

Specifications:

  • Part Number | 976200-2
  • Voltage | 220 V/ 440 V, 3-phase
  • Horsepower | 3.5/4.5
  • Cutting Ability | Ferrous / Non-Ferrous / Plastic
  • Maximum blade diameter | 14-1/2”
  • Maximum vise opening | 8-3/4”
  • Maximum feed vise opening | n/a
  • Maximum Angle | 45° / 90° left / right
  • Slotting | Yes
  • Phase | 3
  • Speeds | 25/50 rpm
  • Weight | 1,360 lbs
  • Solid round 90˚ capacity | 4-1/4”
  • Solid round 45˚ capacity | 3-5/8”
  • Tube 90˚ capacity | 5-1/16”
  • Tube 45˚ capacity | 5”
  • Square 90˚ capacity | 4-1/4”
  • Square 45˚ capacity | 3-7/8”
  • Rectangle 90˚ capacity | 4” x 7”
  • Rectangle 45˚ capacity | 4” x 6”
  • Work height | 35”
  • Height | 73”
  • Width | 28”
  • Depth | 39”

 

PLEASE NOTE, IMPORTANT INFORMATION:

  • Dake collects on all orders shipped to California

 

Title of the document

Dake Warranty

Customers Also Viewed