Baldor
Baldor 1250 Buffer w/ GA20 Pedestal Pkg
Baldor 1250 Buffer with GA20 Pedestal Package
Baldor Industrial Buffers are made to use with soft cloth buffing wheels and buffing compounds. Used for buffing and polishing objects to various degrees of luster. Powerfully built to withstand the most demanding workloads. Large diameter shafts and over-sized permanently lubricated ball bearings. Long shaft extensions and slim motor design provides extra clearance for buffing and polishing odd-shaped objects. Designed for use with soft cloth wheels. Supplied with manual starter, connected at factory for 230 volts. Specify voltage when ordering.
1250 Features:
- Industrial buffers
- Includes flanges and nuts
- Single phase
- 60 Hertz
- 115/230 volt
- Shipping Weight: 164 lbs
- UR Agency Approval
- Factory connected for 230, manual starter, specify voltage when ordering.
Specifications:
- Catalog Number | 1250
- Specification Number | G12-120A-0002
- Horsepower | 115/230
- Voltage | 115/230
- Hertz | 60
- Phase | 1
- Amps | 20/10
- RPM | 1800
- Baldor Type | 3634L
- Max Wheel Size | 12 inches
- Wheel Width Min/Max | 2.00/2.50
- Mechanical Specification Number | G2LY0120
- Electrical Specification Number | G2WG0002
- UL Listed | No
- CSA Certified | No
* Not for use with wire wheels. Prices do not include pedestals or wheels. Some buffing applications may require the addition of operator safety devices such as guards and exhaust hoods with ventilation.
114, 111, 332B, 333B) Supplied with 8-ft. 3-conductor power cord and on/off switch connected for 115 volts.
(Models 334B, 330B, 409B, 412B) Supplied with on/off switch connected for 208-230 volts less cord.
(Models 407B, 410B) Supplied with on/off switch connected for 115 volts less cord.
(Models 1250, 1251, 1252, 1253) Supplied with manual starter, connected at factory for 230 volts. Specify voltage when ordering
(Models 1457, 1458, 1454, 1453) Supplied with magnetic starter, connected at factory for 230 volts. Specify voltage when ordering
** Factory connected for 230 volts, manual starter, specify voltage when ordering **
GA20 Features:
- Cast Iron Pedestal
- For 8", 10", 12", and 14" grinders
- ¾ through 7½ HP Buffers
Specifications:
- Height: 30"
- Shipping Weight: 125 lbs
PLEASE NOTE, IMPORTANT INFORMATION:
- This item ships by truck and the shipping charges calculated are to a commercial address only. If non-commercial, check the residential shipping option above.
- Manufacturer's Warranty Only
- Most Baldor buffers in stock and usually ship in 24 hours.
- Buffers are designed for use with soft cloth wheels ONLY. Specific buffing applications may require the addition of operator safety devices. Consult with a safety engineer before installation. Includes flanges and nuts but does not include wheels.