Champion HR15-12ADV 15 HP Horizontal Tank Air Compressor

Shipping: Free Shipping
Shipping: Free Only In the US 48 States

Champion HR15-12ADV 15 HP Horizontal Tank Air Compressor

R-Series Standard Installed Features: Simplex & Duplex:

  • Mounted NEMA 1 Control Panel
    • Includes control voltage transformer
  • Controls:
    • Tank mounted Simplex is start/stop pressure switch control
    • For base mount units, the start/stop pressure switch control is ordered separately
    • Duplex units are start/stop control with alternation
  • ASME coded receiver (EXCEPT Base Mount Models)
  • 1800 RPM Motors (Duplex x2)
  • Intake Filter/Silencer (Duplex x2)
  • Enclosed Belt Guard (Duplex x2)
  • Loadless Starting

Advantage Standard Features:

  • Heavy Duty Two-Stage, Splash-Lubricated Air Compressor Pump(s)
  • Multi-Finned Cylinders
  • Integral Cylinder Head
  • Intercoolers for Cooling Between Stages
  • Reliable High Flow Disc Valves
  • Tapered Roller Main Bearings
  • Balanced Crankshaft
  • Oil-Level Site Glass
  • Centrifugal Unloader for Loadless Starting
  • 0-300 PSIG Air Pressure Gauge
  • Factory Fill with ChampLub Lubricants
  • Vertical or Horizontal Configurations
  • ASME Code Air Receiver
    • Pressure Relief Valve
    • Service Valve
    • Drain Valve
    • Pressure Gauge
  • Oversized Inlet Filter

Premium Accessories Included:

  • Vibration Isolator Pads | Isolates the compressor unit from the foundation or floor. Reduces noise and protects the unit from out-of-level floor situation that could cause vibration and damage
  • Control Panel (Duplex units utilize two magnetic starters and alternators) | Provides thermal overload protection, and transformer (simplex only) provides reliable low voltage output to the auxiliary components. May be mounted or unmounted
  • Automatic Tank Drain | A pneumatic or adjustable electric time drain automatically discharges moisture from the receiver
  • Low Oil-Level Monitor | Low oil-level monitor shuts down the unit when oil levels are below an adequate level. Prevents the unit from restarting if oil levels are not at an adequate level.

R-Series Design Advantage:

  • Multi-finned cylinders for Cooler Operating Temperatures
  • Integral Cylinder/Head design for Trouble-Free operation
  • Domed Pistons
  • High efficient lap joint piston rings with bi-directional seal
  • Automotive style, two-piece connecting rods
  • Pressure relief valves
  • Large diameter finned intercoolers
  • Optimized cooling fan/flywheel
  • Reliable High-flow disc valves
  • Tapered roller main bearings
  • Balanced crankshaft
  • Large capacity cast-iron crankcase
  • Centrifugal unloader for minimized starting power & completely load-less starting

R-Series Standard Features:

  • Load-less starting (via centrifugal unloader) for lower energy costs and less wear on drive motor
  • ASME inter-stage pressure relief valve for protection
  • ODP NEMA 1760 RPM electric motor
  • 10 Micron industrial grade intake filter
  • ASME coded receiver
  • 0-300 PSIG air pressure gauge on tank
  • Three Phase - 208 or 230 voltage (must specify when ordering)


  • Lubrication | Splash
  • Unit Configuration | Simplex
  • Tank Configuration | Horizontal
  • Tank Size (Gallons) | 120
  • Model Number | HR15-12
  • Pump Model | R-40
  • ACFM 175 PSIG | 54.1
  • RPM | 776
  • Approx Ship Weight (lbs) | 1210


  • SALES TAX | Champion is required to collect sales tax for the following states: KS, MD, MS, NV, unless a properly filled out tax exemption form is provided.
Title of the document

Champion Warranty

Customers Also Viewed