Power Team PE172A Single-Acting Hydraulic Pump
Best suited for crimping, punching and pressing. Not for lifting. Thermoplastic reservoir. The 17 series hydraulic pumps are designed to have a maximum of 690 bar (10,000 psi) at a flow rate of 278 cc/min (17 cu. in/min).
Images are representative and for illustrative purposes only, actual product may differ from image shown.
Features:
- For use with single or double-acting cylinders at operating pressures up to 10,000 psi.
- For intermittent duty; starts under full load.
- Equipped with 1⁄2 hp, 3,450 rpm, single-phase, thermal protected induction motor; 10 ft. remote control cord (PE172S has 25 ft. cord)
- Low amperage draw; small generators and low amperage circuits can be used as power source.
- Extremely quiet noise level (67-81 dBA).
Specifications:
- Valve Type | Auto
- Valve Function | Advance
- Control Switch | Remote Motor Control (10ft.) on
- Motor | 1
- Amp Draw (115 V @ 10,000 PSI) | 10 Amps
- RPM | 3450
- Reservoir Usable (CU. IN. [L]) | 295 [4,7]
- Maximum Pressure Output (PSI [BAR]) | 10,000 [700]
- DBA @ Idle and 10,000 PSI [700 BAR] | 67
- Oil Delivery (CU. IN./MIN. @ 0 PSI [L/MIN. @ 0 BAR] | 290 [4,6]
- Oil Delivery (CU. IN./MIN. @ 100 PSI [L/MIN. @ 7 BAR]) | 190 [2,5]
- Oil Delivery (CU. IN./MIN. @ 5,000 PSI [L/MIN. @ 350 BAR]) | 20 [0,3]
- Oil Delivery (CU. IN./MIN. @ 10,000 PSI [L/MIN. @ 700 BAR]) | 16 [0,2]
- Weight (with oil) | 45
