Norco 82302B 1/2 Ton High Lift Wheel Dolly 

For the removal and installation of single, tandem and duplex tires and wheels which are mounted on trucks that are supported above ground level.

Features:

• Heavy duty lift arms made with ball bearing conveyor rollers which allow easy rotation of wheels for alignment with bolt pattern.
• 7-1/2” of side to side lift arm adjustment eliminates the trial and error method of aligning the rim’s lug holes with the wheel drum.
• A 1,500 pound capacity heavy duty winch with 5 to 1 gear ratio provides ease of operation.
• The winch gear design acts as a brake and allows the load to be lowered incrementally if desired and without the need for constant hand pressure against the crank handle.
• A hydraulic jack tilts the lift arms to match the angle of the spindle.
• Safety chain provided to secure tires and wheels to the dolly.
• Maneuverability is made easy by means of two rear mounted ball bearing caster wheels. The caster wheels include a locking mechanism which can prevent the dolly from moving.

Specifications:

• Lift Height:
• Low: 3"
• High: 41.25"
• Lift Arms:
• Width: 24.25"
• Length: 21"
• Tilt Angle -2° to +30°
• Side to Side Adj.:
• Left: 3.25"
• Right: 4.25"
• Overall Dimensions:
• Length: 45.75"
• Width: 43.75"
• Height: 62"
• Shipping Weight 315 lbs.

PLEASE NOTE, IMPORTANT INFORMATION:

• This item ship by truck and extra shipping charges will apply to ship to a non-commercial address. If Residential Delivery or Liftgate Delivery is needed, please select one of the choices above BEFORE adding to the cart!