Midtronics PBT-300 Professional Battery Tester

The very latest in professional testers
With an expanded test range that makes troubleshooting even easier than before, the PBT-300 series represents the latest in the PBT battery and electrical system testers designed for the professional technician.

Expanded Test Range for Complete Electrical System Diagnostics
The PBT-300 brings even more of the power of Midtronics battery and electrical system testing technology from the show to the palm of the technician's hand. It includes all the features of the PBT-200, plus:

• Expanded measurement range from 100–1400 CCA
• Green and red LEDs give fast decisions on starter and charging system testing
• Starter system testing: pressing the down arrow displays the captured voltage from cranking the engine
• Charging system testing: pressing the up arrow displays the captured high voltage from the alternator

The PBT Series of analyzers makes the leading battery and electrical system analysis technology affordable. Now, every technician can experience the advantages of conductance testing with a fast, simple and portable system that improves safety, productivity and accuracy. Using either model of the PBT Series analyzers, a technician can accurately and quickly test batteries, even when discharged. The portable units are activated by simply connecting the clamps to the battery, and test by setting the rating and pressing the test button. In seconds, an accurate test decision is achieved and displayed as an easy to understand red, yellow or green LED result. With models covering vehicle categories from recreational and motorcycle through family transports, a wide range of vehicle testing can be easily afforded.

Features:

• Measurement range from 200-850 CCA
• Accurate battery test decision in seconds
• No user interpretation required
• Voltmeter mode for testing both the starter and the charging system
• Shows available power in CCA’s at the end of each test
• Bad cell detection
• High/low voltage capture for improved starter and charging system testing

Specifications:

• Display |
• 3 LEDs: green/yellow/red
• 3 Position LED screen
• Operating Temperature | 0˚ F to120˚ F (-18˚ C to 50˚ C)
• Power Requirements | Uses the power of the battery under test; minimum 8 volts required
• Operating Temperature | 0˚ F to120˚ F (-18˚ C to 50˚ C)
• Voltmeter Range | 8.0 - 19.0 VDC
• Housing Material | Acid-resistant ABS plastic
• Housing Dimension | 75 in x 3.5 in x 2.0 in (230mm x 102mm x 65mm)
• Housing Weight | 16 oz (427 g)

PLEASE NOTE, IMPORTANT INFORMATION:

• SALES TAX | Midtronics collects Sales Tax in the following states: AR, CO, KS, KY, MD, MN, NE, NV, NM, NY, NC, ND, OK, RI, SD, UT, VT, WA, WV, WY unless a properly filled out tax exemption form is provided. Sales Tax will NOT be applied at checkout.