JET’s 24” Planishing Hammer has a quick change set up on the upper dies and a deep throat that works to the middle of most panels. The head with 3-speed regulator is capable of 4,400 – 4,800 / 3,200 – 3,500 / 1,800 – 2,000 blows-per minute (BPM). Easy to-reach, adjustable flow control valve allows the user to deliver the proper BPM needed for any job. Operates on standard shop air.

• Smooths beads and forms mild steel sheet metal up to 16 Gauge
• Smooths beads and forms aluminum and copper up to 1/8 in. thick
• Machine supplied with a pair of upper and anvil dies
• 3-Position airflow regulates speeds of pneumatic hammer
• Machine controlled with 110V AC foot control
• 2-Die Set Brackets
• Quick change of upper dies
• Retractable handle makes machine easy to move around the shop
• Wider base support to prevent movement of machine while in use

Specifications:

• Frame Tube Sizes | 4" x 4"
• Throat | 24"
• Head Opening | 2-1/2"
• Maximum Pressure (PSI) | 90
• Air Consumption (CFM) | 8.8
• 3-Speed Regulator (Hits Per Min.) | 4,400 - 4,800 / 3,200 - 3,500 / 1,800 - 2,000
• Noise Level (DB) | 93 - 105
• Overall Dimensions | 34"l x 30"w x 61"h
• Weight | 220 lbs

PLEASE NOTE, IMPORTANT INFORMATION:

• This item ships by truck. Please notify Mile-X Equipment if residential or liftgate is required. Please note that for residential deliveries someone must be there to accept delivery. When ordering the checkout cart will incorrectly state that this ships by UPS.