Brake Tools

OTC 5079 Power Steering System Analyzer There is only one way to troubleshoot problem components in a heavy-duty power steering system: a flow and pressure reading meter. OTC's new No. 5079 measures both: 1 to 10 gallons oil flow and up to 3,000 psi of...

OTC 5072 Lucas Rear Brake Adjust Tool For medium-duty hydraulic brake systemsEnables you to easily adjust Lucas Girling hydraulic brake systems (popular in Ford F700, F800, and F900 series)The tool's offset design and extra handle length get the job done...

OTC 5066 Bearing Driver This tool is designed to install the bearing on 2" diameter input shafts used in Eaton, Fuller, Roadranger transmissions. No. 5066 – Bearing driver. Wt., 5 lbs., 6 oz.

OTC 5065 Countershaft Bearing Driver Eases the task of installing a main-case countershaft bearing, Works on Eaton, Fuller, 2 Series Roadranger transmissions.No. 5065 – Countershaft bearing driver. Wt., 3 lbs., 14 oz.

OTC 5064 Countershaft Pushing Tool Replacing rear countershaft bearing snap rings in Eaton Fuller transmissions? With this tool, you can easily move the countershaft rearward to expose the snap ring.Works on Eaton, Fuller, Roadranger transmissions...

OTC 5057 Clevis Pin Press Removing corroded clevis pins from a brake air-chamber push rod can be a maddening and time-consuming task — unless you’re using our clevis pin press. This handy screw operated tool applies the force just where...

OTC 5056 Automatic Slack Adjust Puller This puller will yank even the most corroded slack adjuster off the S-cam — and do so in just a fraction of the time needed with 'heat and beat" methods. Features: Won't damage componentsRugged forcing screw...

OTC 5055 Manual Slack Adjust Puller This puller will yank even the most corroded slack adjuster off the S-cam — and do so in just a fraction of the time needed with 'heat and beat" methods. Features: Won't damage componentsRugged forcing screw and...

OTC 5054 Air Brake Service Kit This kit has the tools needed to remove slack adjusters and push-rod clevis pins used in the S-cam brake systems of class 7 and 8 vehicles. Features: Works on manual or automatic slack adjustersIncludes Nos. 5055 and 5056...

OTC 5051 Bearing Puller Set When teamed with our No. 7070A puller, this puller set will remove front and rear countershaft bearings from the main case of Eaton, Fuller, 2 Series Roadranger transmissions.Includes pulling collet, sleeve, and a pair of...

OTC 5038 Brake Anchor Pin and Bushing Service Set With the No. 5038, there's no need to remove the bearing hub assembly just to replace the pins and bushings on 16-1/2" S-cam trailer and tractor "Q" brake systems. Much less complicated and time...

OTC 4592 HD Truck Brake Spring Plier Designed to remove and install the brake shoe return springs on medium-duty and heavy-duty drum brakes.No. 4592 – Truck Brake Spring Pliers. Wt., 2 lbs., 13 oz.

Branick G-300 Brake Bleeder The Branick G-300 Pressure Brake Bleeder is another OEM-recommended product from Branick. It's a diaphragm-type bleeder that keeps fluid and air separated. It has a large 4-gallon reservoir eliminating frequent refilling and...

OTC 4799 Brake Piston Removal Locking Pliers This specially designed locking pliers allows the removal of brake caliper pistons during service or rebuild.  The pliers is simply clamped into the I.D. of the caliper piston allowing it to be pulled out...

OTC 4743 Motorcycle Brake Caliper Spreader Compresses the brake pistons on most style calipers for easy pad replacement. • Fits all front and some rear disc brakes. • Range: .25" (5 mm) to 2.25" (58 mm). Works on all automotive applications in...

OTC 6093 Disc Brake Pad Spreader Works on: 1998–2001 Chev. Lumina 1998–2004 Chev. Monte Carlo 2000–2004 Chev. Impala 1998–2004 Buick Regal 1998–1999 Olds Cutlass 1998–2004 Pontiac Grand Prix 1997–2004 Ford...

OTC 6596 Brake Pad Gauge The 6596 Brake Pad Gauge allows for a definitive measurement of brake pads to determine remaining life. • Unique design allows for measurement on the vehicle without the removal of any components in most cases (wheel...

OTC 6502 Master Brake Flaring Tool Kit Covers all the capabilities of the following separate kits; Single Flare Standard Lines 3/16” – 5/8” • Single Flare Metric Lines 4mm – 14mm • Double Flare Standard Lines 3/16"...

OTC 7034 Disc Brake Pad Spreader Disc Brake Pad Spreader Disc brake pad installation is much easier when you’re using this spreader, which fits between the new pads and expands to retract the piston. This leaves your hands free to slide...

Central Tools 6450 Disc Rotor and Ball Joint Gauge Set Features: Check ball joint wear and disc rotor run-out, gear backlash, valve guide wear, camshaft wear Eliminates vibration problems & false readings by mounting directly on spindle ...