Baileigh Industrial
Baileigh Industrial HMB-1125 Manual Mandrel Bender
Baileigh HMB-1125 Manual Mandrel Bender
The HMB-1125 from Baileigh Industrial is an exciting new manual mandrel bender that was designed to help produce tight bends in thin wall tubing without the space issues and expense of a full blown automatic mandrel bender. This unique machine uses a one way bearing and gear reduction setup to help produce enough power to bend up to 1-1/8” OD mild steel. For accurate and consistent bends a digital readout is also standard to keep track of the bend degree. Perfect for the furniture maker, this mandrel bender comes with a 48” mandrel rod and has the ability to bend to 180 degrees. This unique machine will have a place in just about any shop.
Specifications:
- Bend Ratio | 5:01
- Capacity Round OD (Mild Steel) | 1.125" x .065"
- Capacity Round OD (Stainless Steel) | 1.0" x .065"
- Bend Direction | CW
- Max. Bend Angle | 200 deg.
- Max. Clr | 4"
- Power | Manual
- Shipping Weight | 500 lbs.
- Shipping Dimensions | 72" x 44" x 68"
*Specifications subject to change without notice.